Curved Stairlift Installation

Every curved stairlift HomeLift installs starts with a detailed measurement of your staircase, because the rail system is fabricated specifically for that staircase and no other.

Request a Consultation

Curved Stairlifts Built for Staircases That Don’t Run Straight

A curved stairlift starts with a precise measurement of your staircase. The rail system is fabricated specifically to match your staircase’s dimensions, angles, and turns, which means the measurement our team takes on the first visit directly determines how the finished installation fits. We carry Bruno and Stannah curved stairlift models, both of which are custom-fabricated after we document your staircase geometry. From that initial measurement through final installation, the typical project timeline runs two to four weeks, with most of that time accounting for fabrication before our technicians are back on-site to install. Once the rail arrives, installation itself is generally completed within a day. Our team handles every stage in-house across Tennessee and Alabama, with no third-party installers involved at any point.

“HomeLift is the only company for your elevator or stair lift needs. I have known of the company for years because of their excellent reputation, but just recently used them personally to install a stair lift in our home. The process was seamless from the initial evaluation with Kevin to the installers. Communication was top-notch, and all of the staff were extremely knowledgeable about the product. The installers came in and installed the stair lift and explained precisely how it would work. I couldn’t have asked for a better experience.”

— Paula Piskie

Get Back to Using Every Floor in Your Home

Every curved stairlift project starts with a measurement visit. Our team comes to your home, documents your staircase geometry, and walks you through which Bruno or Stannah model fits your layout and how the installation would be sequenced. One visit is all it takes to move from uncertainty to a clear plan. Reach out today and we will get that scheduled.

Schedule a Consultation

A Custom Rail Means More Staircases Qualify Than You Think

The rail system on a curved stairlift isn’t bent or adjusted on-site. It’s fabricated from scratch by Bruno or Stannah using the exact measurements our team documents during the initial visit, which means the finished rail is built to your staircase, not adapted to fit it. That process accommodates staircases with curves, intermediate turns, landings, and some spiral configurations that a standard stairlift can’t serve. The precision of the measurement our team takes on the first visit is what determines how well the rail fits and how smoothly the lift runs once it’s installed.

Staircases with multiple 90-degree turns, split landings, switchback configurations, or tighter radius curves require more detailed rail fabrication than a single-curve staircase, but in most cases they still qualify. Multi-story staircases with intermediate landings between floors are also within range for most Bruno and Stannah curved rail systems. True spiral staircases with a continuous center pole are the configuration most likely to fall outside what a curved stairlift can accommodate. Our team determines exactly what is possible during the in-home measurement visit and is upfront about any configuration that doesn’t work before anything is ordered.

Curved Stairlift Pricing, Timeline, and Maintenance

Curved stairlift pricing is driven by staircase length, the number of turns or landings the rail needs to navigate, and the model selected between Bruno and Stannah. Because the rail is custom-fabricated for your staircase, HomeLift provides a project-specific quote after the in-home measurement visit, not before.

  • Installation Timeline

    Rail fabrication typically runs two to four weeks after the measurement visit, depending on staircase complexity and manufacturer lead time. Once the rail arrives, installation is completed in a single day in most cases. First visit to operational stairlift is generally three to five weeks.

  • Maintenance After Installation

    Bruno and Stannah curved stairlifts are built for daily use but benefit from scheduled maintenance. Our Gold service contract covers parts and labor, including batteries, circuit boards, and drive components, with three service calls per year and a guaranteed four-business-day response. Our Silver plan covers labor under the same structure.

Frequently Asked Questions

Timeline depends on the complexity of the staircase and the lead time on the custom rail fabrication. Once the rail arrives, the installation itself typically takes a single day. The overall timeline from initial measurement to completed installation varies by project, and our team provides a specific estimate after the site visit.

The cost difference comes down to the rail. A straight stairlift uses a standard rail that can be cut to length on-site. A curved stairlift requires a rail fabricated from scratch using the exact measurements of your staircase, a process that takes two to four weeks and is specific to that staircase alone. The stairlift unit itself is comparable in cost between the two types. What you are paying for on a curved model is the engineering and fabrication of a component that cannot be reused or transferred to another home.

Staircase complexity is the biggest variable in that cost. Older construction common in Nashville neighborhoods like Belle Meade and Green Hills tends to feature tighter radius curves and multi-turn layouts that require more involved rail fabrication than the more straightforward staircase geometry found in newer Williamson County or Huntsville builds. HomeLift doesn’t publish pricing online because the quote is specific to your staircase. Our team walks through the cost breakdown during the consultation once the staircase has been measured.

Bruno and Stannah curved stairlift models are rated for different weight capacities depending on the specific model selected. Bruno’s curved options accommodate up to 400 pounds, and Stannah’s curved models are rated up to 310 pounds. If weight capacity is a deciding factor for your household, our team factors that into the model recommendation during the consultation.

Yes. A curved stairlift isn’t a permanent structural modification to your home. The rail is mounted to the staircase treads rather than the wall, and our team can remove the unit and rail if your needs change. The footprint left behind is minimal. If you think there’s a chance the stairlift is a temporary solution rather than a permanent one, that’s worth discussing during the consultation so we can walk you through what removal involves.

Bruno and Stannah both offer a range of seat and upholstery options on their curved models, including standard and padded seat configurations with adjustable armrests and footrests. Some models offer swivel seat options that rotate at the top or bottom of the staircase to make it easier to get on and off. Our team walks through the available configurations for each model during the consultation.

Both Bruno and Stannah curved stairlifts include a remote call/send control that lets you call the stairlift to your position from either end of the staircase. Most models include a handheld remote as well as a wall-mounted option so the stairlift is always within reach regardless of where it parked last.

Tell Us About Your Staircase and We Will Handle the Rest

Every curved stairlift installation starts with a home visit and a measurement of the actual staircase. HomeLift installs and services curved stairlifts across Tennessee and Alabama. Share your details below and we will be in touch to schedule a time.